opfcricket.blogg.se - Pfsense vtnet0 no ip

Screenshots included in the links and please let me know if there is any more info I can provide. According to the WebGUI, both the WAN and LAN interfaces are up, but I could really use help troubleshooting why the WAN won't pull an IP. I also called my ISP (Altice, so I wasn't holding my breath), and their reps said it wasn't a MAC binding issue because they don't control anything past the modem. In each case the TPLink would pull my public IP while the pfsense remained 0.0.0.0. For the sake of trial and error, I swapped the modem ports that each was plugged into, and tried each independently as well.

pfsense build - Intel i7-7700K CPU, 1x8GB DDR4 RAM, Gigabyte Z170X-G6 Motherboard (this board has two 1Gbs Ethernet ports)īoth the pfsense rig and the TPLink are connected to the modem, but only the TPLink is pulling a WAN IP and able to offer web connectivity.

TPLink AX1800 Wi-Fi 6 Router (Presently servicing my home network, but the goal is for my pfsense rig to take over and repurpose the TPLink as an AP.) WAN ( vtnet0) connected to a 'far-side' network containing the gateway, DNS and DHCP servers LAN ( vtnet1) connected to a 'near-side' network containing clients The firewall is to explicitly join the broadcast domains of the two segments such that they're both within 192.168.1.1/24.

Arris SB8200 Cable Modem (COAX in, Two 1Gbs RJ45 out).

As best as I can tell, everything is working normally except that WAN is failing to pull my public IP, instead listing 0.0.0.0. I first learned about pfsense from a Network Chuck video on youtube, and decided to try it out for myself on spare hardware I had laying around.